E-Glass Braided Packing
BRAIDED E-GLASS FIBRE PACKING - 550°C
Braided packing is produced from various types of yarn and can be supplied in round, square or rectangular section.
Braided E-Glass packing is a high strength product with low compressibility and is especially recommended for those heavy duty applications. When the packing is coated with graphite, an increase in lubricity results.
Braided E-Glass packing is made from texturized, continuous E-Glass fibre filaments up to a maximum of 9 microns. These fibres cause considerably less irritation of the skin than the coarser fibres.
Braided E-Glass packing exhibits excellent chemical stability resisting attack from most corrosive agents. Exceptions are Hydrofluoric Acids and Phosphoric Acids and Concentrated Alkalies. No water of hydration is present. Excellent die-electrical strength.
Braided E-Glass packing is available in the following diameter sizes : 6-50 mm, section sizes : 6 x 6 - 50 x 50 mm. Other dimensions and rectangular sizes available.
Products are also available in a black version which is made by a colourfast lubricant but manufactured to order.
- Static Seals in (Steam)Boilers and (Coke)Furnaces
- Kiln Car Seals
- Seals in Heat Exchangers
- Seals between Filter Elements
- Wrapping of Exhausts
- Corseal have in-house facilities to apply the protective braiding directly on the flexible products
Typical Physical Properties
Average density: 900 kg/m3
Basic Composition: Silica
Continuous Use Limit: 550°C
Melting Point: 840°C
SIZE IN MM, COIL LENGTHS
6MM = 100M
8MM = 100M
10MM = 50M
12MM = 50M
15MM = 50M
20MM = 30M
25MM = 30M
30MM = 10M
40MM = 10M
50MM = 10M